ShurLok - INSTRUCTIONS

The ShurLok operates on a patented system of two combinations. One combination opens the shackle (initial factory setting on 0-0-0-0) and the second combination opens the sliding key storage door (initial factory setting
on 3-3-3-3). To change the factory default settings and to set your own combination, follow the instructions below:

1. Set the dials on the shackle opening combination and open the shackle, to ensure you are on the correct shackle opening combination. (initial factory setting on 0-0-0-0)
2. Use a dime or paper clip to turn the change screw 90 degrees (1/4 turn) clockwise to the vertical position. Never force the change screw. If it is difficult to turn, make sure the numbers are lined up and that you have the correct combination. If you are not on the correct shackle opening combination, the change screw will not turn.
3. Set the combination to the desired shackle combination.
4. Return the change screw to the original (horizontal) position by turning it counter-clockwise 90 degrees (1/4 turn).

The key compartment door combination is automatically set when the new shackle combination is set. Follow the chart below to find the new combination for the sliding door.

Shackle to Door Conversion Chart

If Shackle is 

Door Is 

Example 1: Shackle combination 7724 -- The door combination would then be 0057
Example 2: Shackle combination 5510 -- The door combination would then be 8843

Write your numbers down and keep them in a safe place.
The ShurLok is secure with 10,000 possible combinations so do not lose your numbers!

To change your combination in the future, always set the combination to your opening shackle combination before turning the change screw.

NOTE: Some locks are stiff when new. If the lock will not open the first time, simply press down on the dials to settle them in place.

The ShurLok Zero Locking Feature

The ShurLok can be opened in the dark or by the vision-impaired by following these directions:

1. Roll all numbers on the dials up and away from you. The dials will all stop on zero.
2. Count the clicks up to your combination (Hint: if you will be using this feature often, we recommend setting your combination to lower numbers that are easier to count up to).

The ShurLok has a one year warranty against manufacturing defects. This does not cover forgotten combinations. Not liable for incidental or consequential damages or loss of combination. If you should lose your combination you can contact us and we can make arrangements for you to ship your ShurLok back so that the manufacturer can reset it for you.